Basic HTML Version
Krüger targets · Online-Shop: www.best-targets.com · Edition: 1. April 2012
24
Category/
Article
Order
no
Distance
m
Bull’s eye
in mm
Size
in cm
Packed
in
Price
per
Price
without
VAT in
e
Price
incl.
19% VAT
in
e
UTILISATION TRAINING TARGETS PISTOL 25/50 m / TECHNICAL INFORMATION
TECHNICAL
INFORMATION
Tips for the use of
Training Targets
(Pistol)
Order-N0. 3150
Dry training =
On this target, the bar is positioned so as to
cover the area in which (on a normal target) the shooter
would have the eye focused on the sights whilst evenly
increasing pressure on the trigger, so that ideally the shot
breaks automatically once the sights leave the stripe, that
is to say, once the holding area has been reached. The bot-
tom surface of the stripe is equivalent to the bottom of the
aiming mark on a normal target. The goal is to release the
shot exactly on leaving the bar, without halting the arm in
order to squeeze the trigger.
Live training =
In this case the shot group should be 12
to 48 mm above the lower edge of the stripe and should lie
horizontally at least within the width of the black, in order
to always be equivalent to the 9-ring.
Order-No. 3155
Dry training =
The triangle is based on the air pistol target.
The bottom edge has about the width of the aiming mark
(59.5 mm) and the distance from the base to the tip of the
triangle is also 59.5 mm. The shooter can orientate the
sights very easily on the bottom edge; canting or over-
tightness can easily be identified.
Live training =
The shots should be as close to the centre
of the triangle as possible, within the area of the 9-ring.
Because of the special geometrical form, the shooter can
very easily work out whether the sights were steady in the
holding area when the shot was released. This element of
training is also used by experienced shooters during the
competition season, to eliminate the errors that creep in
over a period of frequent competitions.
targets for:
– rifle 100 m
– muzzle loader
– PISTOL 25 m - (Precision stage)
– Standard pistol
– PISTOL 50 m
ring
ø mm tolerance
10
50 mm (± 0.2 mm)
9 100 mm
(± 0.4 mm)
8 150 mm
(± 0.6 mm)
7 200 mm
(± 1.0 mm)
6 250 mm
(± 1.0 mm)
5 300 mm
(± 1.0 mm)
4 350 mm
(± 1.0 mm)
3 400 mm
(± 1.0 mm)
2 450 mm
(± 1.0 mm)
1 500 mm
(± 1.0 mm)
inner
ten 25.0 mm
(± 0.2 mm)
ring thickness: 0.2 to 0.5 mm
Best.-Nr.: 3150
Skills training target for pistol 25/50m
cross-stripe (100 x 225 mm)
above
3150
25/50
-
26 x 26
100
100
6.72
8.00
Best.-Nr.: 3155
Skills training target for pistol 25/50m
Triangle (200 x 223 mm)
in the center
3155
25/50
-
26 x 26
100
100
6.72
8.00
Fanfold target for pistol 25 / 50 m
1 band = 100 targets,
continuous zigzag-folded
with perforations,
size of one target: 51 cm wide,
53.34 cm high (21’’)
2065
25/50
200 51 x 53.34 1 band
band
47.65
56.70
consecutively numbered
2065 N
25/50
200 51 x 53.34 1 band
band
56.89
67.70